Operating Systems
Blackmagic Design Capture cards are compatible with the following Windows based operating systems:
- Windows 7 64 bit
- Windows 8 64 bit
QuickTime
Apple QuickTime needs to be installed for some applications to function with a Blackmagic capture card. You can download the latest version of Apple QuickTime for Windows: QuickTime Download
CPU Requirements
In general, you should choose a CPU that meets or exceeds the system requirements of the software application you are planing on using.
Supported Hardware
Certified PC Workstations
The following workstations are certified for use with DeckLink, Multibridge and Intensity capture cards:
- 3DBoxx 4920
- Hewlett Packard Z420
- Hewlett Packard Z620
- Hewlett Packard Z820
The following workstations have been discontinued but are known to work.
- Hewlett Packard Z400
- Hewlett Packard Z600
- Hewlett Packard Z800
- Hewlett Packard XW9300
- Hewlett Packard XW8600 - (not recommended for DeckLink PCI or PCI-X cards)
Recommended Motherboards
The following motherboards are recommended for use with DeckLink, Multibridge and Intensity capture cards:
- ASRock Z87 Extreme11/ac
- ASRock Z87E-ITX
- ASRock Z87 Extreme4
- ASRock Z87 Extreme4/TB4
- ASRock Z87 Extreme 6
- Asus Z87 Deluxe/Quad
- Asus Z87-Pro
- Asus Z87-PLUS
- Asus Z87-Expert
- Asus Z87-Gryphon
- Asus P9X79 WS
- MSI Z77A-G45 Thunderbolt
- Gigabyte GA-Z87X-UD7 TH
- Gigabyte Q87M-D2H
- Gigabyte Z87X-UD4H
- Gigabyte X79-UD5
- Gigabyte Z77MX-D3H TH
- Gigabyte Z77X-UP4 TH
- Gigabyte Z77X-UP5 TH
- Gigabyte Z68X-UD3H-B3
- Gigabyte Z97-UD5H
- Gigabyte Z97X-UD7 TH
- Gigabyte Z97-WIFI
- Gigabyte GA-H87M-D3H - (not recommended for DeckLink Duo)
- SuperMicro X10SAT
- SuperMicro X10SLV (not recommended with DeckLink SDI)
- SuperMicro X10SLV-Q (not recommended with DeckLink SDI)
- SuperMicro C7Z87-OCE - (not recommended for DeckLink Studio 2)
- SuperMicro C7Z97-OCE
The following motherboards have been discontinued but are known to work.
- Asus P5E
- Asus P5B
- Asus P5Q Pro Turbo
- Asus P6T
- Asus P6X58D-E WS
- Asus P6X58D (Bios later than 12.04.2010)
- Asus P8P67 PRO (Rev 3.1)
- Gigabyte G1.Sniper (x58 chipset)
- Gigabyte EP45-DS3)
- Gigabyte x48DQ6
- Gigabyte GA-P67A-UD7-B3 (rev. 1.0)
- Intel D975XBX
- Intel DX58SO)
- XFX 790i Ultra
PCIe Gen 1 slots are not compatible with PCIe Gen 2 cards, including DeckLink 4K Extreme.
Memory
Blackmagic Design recommends a minimum of 4GB of memory for all systems.
Graphics
For optimal performance, an accelerated graphics card is recommend for use with DeckLink, Multibridge and Intensity cards.
Please see the Graphics Card Requirement Tech note regarding appropriate graphics cards for our products.
Storage
You will require hard drive storage with your Blackmagic card that can provide a data rate greater than that of the video compression you are using.
For further information about this, please see the Recommended Disk Arrays for Uncompressed Video Tech note for a list of Storage solutions that have been tested for use with Blackmagic Design products.